Oce VarioPrint 2045-65 NC, Руководство по эксплуатации

Страница: 63 / 213

The print function 61
Printing a job on special material placed in a paper tray
1
Open the paper-compartment door, place the required paper and close the door.
2
Select the job in the mailbox.
3
Activate the 'Paper' section.
Make sure that the 'Paper input' card is open.
Check to insure that the required size and orientation are selected.
[35] Select the tray and the required paper size
[35] Select the tray and the required paper size
4
Press the start key .
5
Press the correction key to leave your mailbox.
6
Press the correction key once more to enter the default operating mode of
the Océ VarioPrint 2045-65 NC.
Printing a job on special material placed in the special feeder
1
Place the required special material in the special feeder.
The face-down side is printed.
2
Select the job in the mailbox.
3
Activate the 'Paper' section.
4
Make sure that the 'Paper input' card is open.
5
Select 'Special feeder' in the 'Source' function box.
6
Select the size and orientation of the special material you inserted in the 'Size'
function box.
[36] The special feeder and the required paper are selected
[36] The special feeder and the required paper are selected