Oce im5530, Руководство оператора

Страница: 86 / 360

82
3.SETTING OF BASIC COPY MODES
3
1. Paper Selection
Automatic Paper Selection (APS)
When you place standard size originals on the original glass or the Reversing Automatic Document
Feeder, the size of the originals is automatically detected, which helps the equipment select paper that is
the same size as the originals.
•
The automatic paper selection may not work correctly depending on the type of the originals. In that
case, select the paper size manually.(
P.84 “Manual paper selection”)
• For original sizes available for automatic paper selection, see P.57 “Originals sizes and types”.
1
Place paper in the drawer(s).
2
Place the original(s).
3
Confirm that automatic paper selection has been selected on the
basic menu. ("APS" is displayed at the top of the screen as shown
below.)
• Automatic paper selection is selected by default at the installation of the equipment.
• If “Change direction of original” or “CHANGE DRAWER TO CORRECT PAPER SIZE” appears, perform the
action accordingly.
• Set other copy modes as required.
Even if the direction of the paper set in the selected drawer differs from that of the original, the equipment rotates
the data of the original by 90 degrees to make copies as long as their sizes are the same. (This works on LT
paper only.) For example, when an LT original is set vertically and LT-R paper is placed in the drawer, the data of
LT original will be rotated and copied correctly on LT-R paper.
When automatic paper selection is not selected
(1) Press the Enlargement/Reduction ([ZOOM...]) button.