Oce CS9160, Руководство пользователя

Страница: 126 / 131

User’s Guide Océ CS9160 printer
126 AP-40790 – Rev 2.0 -23/08/2011,
6.3.4 Printing-related troubleshooting
Printing is partially stained or incomplete.
Notes
•
Using non recommended media can result in inferior print quality.
N° Possible cause Remedy Reference
1 Is the media moist? Replace it with new media. "Replacing roll media"
2
Are you using the
folded or wrinkled
media?
3
Does the media
bend? Use the recommended media. When using
media other than the dedicated one, set the
Vacuum Fan menu. " "Panel setup menu"
The printing position is incorrect (some parts of the media cannot be printed on)
N° Possible cause Remedy Reference
1
Is the loading position
of the media correct? Set the media correctly. Setting roll media
2
Did you set up the
origin and print
position? Cancel or reset the settings of the origin and print
position. "Panel setup menu"
Printing is blurred
N° Possible cause Remedy Reference
1
Are you using the
recommended
media? Use the recommended media.
2
Are you using thick
or thin media? Use the recommended media.
3
Is the media printed
on the printing
surface? Confirm the printing surface of the media and set it
correctly. Setting media
4
Did you perform an
Alignment? Perform Alignment. Adjust the print
head
5
Did you perform a
Media feed
compensation? Perform Media feed compensation. "Media feed
compensation"
6
Is each heater set to
the appropriate
temperature? Set it to the appropriate temperature. "Panel setup menu"
7
Is the head height
set to High? Return the head height to "Normal (Low)". "Head height
adjustment"