Oce CS9160 Скачать руководство пользователя страница 46

Страница: 46 / 131

User’s Guide Océ CS9160 printer

AP-40790 – Rev 2.0 -23/08/2011,

4.3 HANDLING AND INSTALLING MEDIA

Notes

•

Refer to “General info on usable media” for details on media handling.

•

It is recommended to use tested and compatible media for this printer.
Refer to the following topics for types and details of media:

“General info on usable media”

4.3.1 Installing roll media

Notes

There are two optional winding systems available for the CS9160

Unwinder/Winder 100 (Only available as option in Europe/ROW)

Motorized winding system with tensioning (T winder) (Standard delivered in North America,

option in Europe/ROW)

•

Please refer to the User Guide of the chosen system to know how to correctly load media

•

Refer to the pricing sheet for more details of these systems.

•

If you do not use one of the above winding systems. You have to use the scroller which is
supplied with the printer.

•

For media with a three inch core, three inch core adapters have to be used.

Notes

•

Set the roll media on a flat and levelled surface.

•

If the roll media and scroller are placed in a vertical position, the scroller might get damaged.

Notes

•

The following roll media can be attached to the scroller supplied with this unit.

Media tube diameter: three inches, outside diameter of media: 150mm or less, weight: 30kg
or less.

Be sure to read and understand the safety warnings before handling the printer.

Содержание CS9160




































































































































Результаты поиска

Содержание CS9160

Отзывы:

Похожие инструкции для CS9160

Бренды по названию

Популярные бренды

Oce CS9160, Руководство пользователя

Результаты поиска

Содержание CS9160

Отзывы:

Похожие инструкции для CS9160

Бренды по названию

Популярные бренды