Oce CS9160, Руководство пользователя

Страница: 109 / 131

User’s Guide Océ CS9160 printer
109 AP-40790 – Rev 2.0 -23/08/2011,
5.1.3 Monthly maintenance
5.1.3.1 Replacing the spitting box sponges
Notes
•
In case your printer is currently loaded with Eco-Solvent ink, we advise to replace the spitting
box sponges every two months.
• Make sure to install the correct spitting box sponges in case your printer is currently loaded
with Bio-Lactite ink.
Be sure to read and understand the safety warnings before handling the printer.
Replace the spitting-box sponges in the following situations.
• When the spitting-box sponge becomes deformed.
• When smears of ink appear on the media
•
1 month after replacement.
Notes
•
For types and details of the spitting-box sponge, contact your local Océ representative.
Step 1 : If the printer is switched ON, make sure that:
•
Printing or other operations are not in progress.
•
The operation panel display is Normal.
Step 2 : Open the front cover.
Step 3 : Use forceps to remove the spitting-box sponges from each spitting box.
(2 at the left spitting box – 1 at the right spitting box)
N° Name
1 spitting boxes
2 spitting-box sponge
Caution
•
Do not drop waste fluid when replacing the spitting-box sponges. If waste fluid comes into
contact with the grid roller, the surface of the grid roller will be damaged, and the media feed
function will be affected.
Step 4 : Install the new spitting-box sponge to each spitting box.
Step 5 : Close the front cover.
•
Spitting-box sponge replacement is complete.
1
1
1
2