Oce CS9160, Руководство пользователя

Страница: 32 / 131

User’s Guide Océ CS9160 printer
32 AP-40790 – Rev 2.0 -23/08/2011,
3.2.2 Switching the power OFF
Be sure to read and understand the safety warnings before handling the printer.
Step 1 : Before powering OFF, be sure that:
•
Printing or other operations are stopped or finished.
• The printer (and operation panel) is in normal mode.
• The head height adjustment lever is lowered
Step 2 : Press the [Power] key to switch OFF the printer.
•
The Power indicating light switches OFF.
Notes
•
If the [POWER] key is pressed or the power indication light lights up green, the power is ON.
•
Press the key once again and switch OFF the power.
•
“Power OFF" is displayed.
Notes
• If the head height adjustment lever is raised, “Change Head Gap Low” is displayed. Lower the
lever.
N° Name
1 Head height adjustment lever
• All the indication lights and the LCD monitor are switched OFF.
•
The printer automatically switches the power OFF.
Notes
• If there is a problem during the Power OFF sequence, the printer displays a message and may
stop operating.
In the case operation stops, refer to “Troubleshooting”.
•
After switching OFF the printer, wait for 10 seconds or longer to switch it ON again.
Step 3 : Raise the media hold lever after the powering OFF cycle, so the pressure of the grid rollers is not
damaging the media.