Oce CS9160, Руководство пользователя

Страница: 57 / 131

User’s Guide Océ CS9160 printer
57 AP-40790 – Rev 2.0 -23/08/2011,
Step 7 : Perform the initial adjust print.
•
Press the [Enter] key.
o
The operation panel displays "Feed Length: 250 mm".
Notes
•
The length that the media is fed for initial adjustment printing is normally set at 250 mm.
• If you make the feeding length longer, the accuracy of the Media feed compensation improves.
If you want to change the feeding length, press the [+] key or [–] key and change the set value.
• Press the [Enter] key.
o
The operation panel displays "Printing".
o
Start Initial adjustment printing.
N° Name
1 Feed length
2 Media feeding direction
o
When the initial adjustment printing is complete, the printer enters the normal status
•
After the initial adjustment printing, cut the media. Refer to: “Cutting media”
Step 8 : Measure the distance between two “+” signs in the initial adjustment print using a measurement
tool, such as a ruler.
Step 9 : Set up Initial Adjust Change.
• Press the [+] key or [–] key to select "PF2: Initial Change".
•
Press the [Enter] key.
o
The operation panel displays "Init: 250.0/250mm".
• Press the [+] key or [–] key and enter the measured value in step 3.
•
Press the [Enter] key.
o
The initial adjustment value is saved.
o
The operation panel displays "PF2: Initial Change".
2
1 1