Oce CS9160, Руководство пользователя

Страница: 74 / 131

User’s Guide Océ CS9160 printer
74 AP-40790 – Rev 2.0 -23/08/2011,
4.7.1 MediaType menu
Setup item Setting Value Description
Media
Type 1 Set up the media type for printing.
It is possible to set 30 different user settings as
"Type 1-30" for printing.
[Enter] key: Shift to the next hierarchy.
refer to:
User media menu
Type 2
...
Type 29
Type 30
—
[Cancel] key: Save the setting value and shift to
the previous hierarchy.
refer to
Setup menu
4.7.1.1 User media menu
Notes
If non-compatible media is used, the following problems may occur:
o
Media detection error
o
Slant, snag and wrinkle of media
o
Media jams
o
Optimum printing quality cannot be obtained due to blots, blurs and dirt of ink.
o
End detection of roll media cannot be performed, etc.
•
The problems caused by the use of non-compatible will not be covered by the warranty and
repair expenses will be paid by the customer.
For details, contact your OCÉ local representative.
Setup item Setting Value Description
Type 1 to 30
Print mode
Set up the print mode according to the used print
data or print speed.
•
[Enter] key: Shift to the next hierarchy.
refer to Print mode menu
PF Adjust
Various settings on the Media feed compensation
can be set.
•
[>] key: Shift to the next hierarchy.
refer to Dist. Adj menu
Pre Heater
Set up the Pre Heater temperature.
•
[Enter] key: Shift to the next hierarchy.
refer to Pre heater menu
Fixer (platen)
Set up the Platen Heater temperature.
• [Enter] key: Shift to the next hierarchy.
refer to Platen heater menu
Dryer
Set up the After Heater temperature.
•
[Enter] key: Shift to the next hierarchy.
refer to After heater menu
StandbyHeating
Set up whether the heater is preheated while in
standby mode.
•
[Enter] key: Shift to the next hierarchy.
refer to StandbyHeating menu
Vacuum Fan
Set up the vacuum fan operation
• [Enter] key: Shift to the next hierarchy.
refer to Vacuum fan menu
—
•
[Cancel] key: Shift to the previous hierarchy.
refer to Media type menu