Chapter 6 : Troubleshooting
162
AP-75037, Rev. 1.1, 24/04/2006
(7) Media jams occur frequently.
Note :
•
We cannot ensure correct media feeding with media other than recommended
media.
No. Possible
cause
Solutions
References
1
You did not use recommended
media.
Use recommended media. Refer to ‘Media type’
2
You used the printer in an
environment other than the
specified environment.
Use the printer in the
specified environment.
Refer to ‘Cautions on handling
media’
3
You used old media.
4
You used folded, creased, or
curled media.
Replace with new media.
Refer to ‘Replacing media’
5
Check the media for curling or
liftoff.
Use the recommended
media.
When using media other
than recommended
media, set the following
items in the media setting
menu.
• Media
• HeadHeight
• Stiff
Refer to ‘Media type’
Refer to ‘Menu setup on the
operation panel’
(8) Roll media cannot be cut correctly.
No. Possible
cause
Solutions
References
1
The edge of the cutting blade is not
sharp.
Replace the cutting blade. Refer to ‘Replacing the cutting
blade’
2
The roll media has static electricity. Remove the static
electricity on the roll
media.
-
3
Media is too heavy to cut
automatically.
Cut the media manually.
(9) You cannot perform initial ink charging.
No. Possible
cause
Solutions
References
1
The front cover is open or the hold
lever is up.
Close the front cover and
lower the hold lever.
Refer to ‘Media handling’
2
Some of the 8 ink cassettes are
not loaded properly.
Load all of the 8 cassettes
properly.
Refer to ‘Installing ink cassettes’
Содержание CS9065
Страница 1: ...Océ CS9065 Océ CS9090 User Guide Eco Solvent ...
Страница 12: ...Chapter 1 Safety Instructions 12 AP 75037 Rev 1 1 24 04 2006 No Type 1 2 3 4 5 ...
Страница 24: ...Chapter 2 Product Overview 24 AP 75037 Rev 1 1 24 04 2006 This page is intentionally left blank ...
Страница 78: ...Chapter 4 Preparing for a job 78 AP 75037 Rev 1 1 24 04 2006 This page is intentionally left blank ...
