Oce CS9065, Руководство пользователя

Страница: 122 / 200

Chapter 5 : Handling the printer
122 AP-75037, Rev. 1.1, 24/04/2006
5.4.5.4 Power on cleaning menu
When cleaning should be performed automatically with the power is turned on.
* OnCleaning *
F1
→
OFF ON
←
F2
Current parameter
→
- OFF -
(1/1)
Setup items Parameters Description
<Off> Power on cleaning is not performed.
On Power on cleaning is performed.
Power on
cleaning
- To shift to the previous menu.
Refer to
Utility menu
5.4.5.5 Media width menu
If media detection has not been performed during initialization, the width of the media is set here.
It can be set in the following ranges:
• 50” model: 210mm-1273mm
• 64” model: 210mm-1651mm
• 87” model: 210mm-2240mm
Notes :
On the media width menu,
•
If a value larger than the width of the media has been set, media or the product may
be contaminated by the ink during printing.
•
If a value smaller than the width of the media has been set, media may not be cut
correctly.
* Width *
210 mm – 1273 mm +
←
F2
841 mm - ←
F4
F2, F4 →
ENTER
Setup items Parameters Description
• 50” model: 210mm -
<841mm> - 1273mm
• 64” model: 210mm -
<841mm> - 1651mm media width
• 87” model: 210mm -
<841mm> - 2240mm
To change media width by operating the following
keys.
• [F2] key: Increases the setup value.
• [F4] key: Decreases the setup value.
• [ENTER] key: Confirms the setup value, shifts to the
previous menu.
• [CANCEL] key: Cancels the setup value, shifts to
the previous menu.
Refer to
Utility menu