Oce CS9065, Руководство пользователя

Страница: 103 / 200

Chapter 5 : Handling the printer
103 AP-75037, Rev. 1.1, 24/04/2006
5.4.2.22 Media cut menu
Set media cut method after printing.
* MediaCut *
F1
→
Off Auto
←
F2
F3
→
Manual
Current Parameter
→
- Auto -
(1/1)
Setup items Parameters Description
Auto After printing has been completed, the media is sent
to the media cut position and is automatically cut.
Refer to
Cutting media
Manual Feed media to the media cut position after printing.
Use regular cutting blades available from hardware
stores.
Refer to
Media cutting procedure
Off No media feed after printing.
Media cutting
- When "ALL" has been selected, proceed to the
Shortest Cut Length menu.
Refer to
Shortest cut menu
• If "Manual" or "Off" have been selected, the screen
changes to the previous menu.
Refer to
Media setup menu
Notes :
•
For the situations shown below, the media cut settings are always changed to "Off"
regardless the previous settings.
o
When "Take-up system" or “Roll-up/roll off system” is set for the media
detection settings (Media detection menu)
•
When using the media shown below, set the media cut setting to "Manual". If set to
"Auto", the following errors may occur :
o
Cloth material: The cloth fiber is not completely cut.
o
Media with glue: Glue will adhere to the cutting blade and decreases cutting
performance.
5.4.3 Setup menu 2/7
5.4.3.1 Printing mode menu
To perform various settings for Printing mode.
* PrintMode *
F1
→
PrnMode1 PrnMode2
←
F2
F3
→
PrnMode3 PrnMode4
←
F4
(1/1)
Setup items Parameters Description
Print mode 1
Print mode 2
Print mode 3
Print mode 4 For each setup value of Printing mode, four settings
of "Printing mode 1" - "Printing mode 4" can be set.
Refer to
Printing mode setup menu
Print mode setup
- [CANCEL] key: to shift to the previous menu.
Refer to
Setup menu