Oce CS9065, Руководство пользователя

Страница: 129 / 200

Chapter 5 : Handling the printer
129 AP-75037, Rev. 1.1, 24/04/2006
5.4.5.14 Rename menu
To change file name of printing data saved in the hard disk.
Notes :
•
Rename menu is displayed if a hard disk has been installed.
•
The file name of printing data sent from the computer is always set to
"TEMPFILE000".
To save transmitted image data, change the file name to a name of your choice in
the Rename folder before transmitting the next printing data.
* Rename *
F1
→ ←
TEMPFILE000
F3
→ →
SELECT →
ENTER
Setup items Parameters Description
Rename File name To select the file to be changed by operating the
following keys.
•
[F1] key: Selects file name with back feed way.
•
[F3] key: Selects file name with forward feed way.
•
[ENTER] key: Confirms setup value. The following
messages are displayed on the operation panel.
•
[CANCEL] key: Cancels setup value, shifts to the
previous menu.
Refer to File management setup menu
* TEMPFILE000 *
F1
→ ←
TEMPFILE000
→ ←
F2
F3
→ →
[T]
→ ←
F4
JKLUVWXYZ01234
Setup items Parameters Description
Characters you want to change To select characters you want to change by operating
the following keys.
•
[F1] key: To select characters you want to change
with back feed way.
•
[F3] key: To select characters you want to change
with forward feed way.
Characters you can use are :
A-Z or 0-9 To select the characters to be changed by operating
following keys.
•
[F2] key: Selects characters to be changed with
back feed way.
•
[F4] key: Selects characters to be changed with
forward feed way.
File name to be
changed
-
•
[ENTER] key: Confirms the new name, shifts to
the previous menu.
•
[CANCEL] key: Cancels the new name, shifts to
the previous menu.
Refer to File management setup menu