Oce Arizona 400 Series GT, Руководство пользователя

Страница: 158 / 270

How to Prepare a Printer Flood Fill Layer for White ink
1.
Open the print job in your ONYX software and use a media model that includes the
Quality-layered print mode.
Note:
The file must be sized at the final output dimensions required for the flood area.
2.
Define one of the data layers as a white flood layer.
To define a layer as a white flood layer first select Quality-Layered as the Printer Print
Mode, then select Define Layers and finally define a white flood layer.
Layers can be defined at any of the following locations when a job is processed:
• Defined in the media when the media is created - Mode Options
• Selected in a Quick Set - Media Options
• Modify the printer settings of a processed job in RIP Queue - right-click the job, edit
printer settings.
Note:
If you want to print first surface (e.g., on opaque media) the bottom and middle layers
can be configured to be white flood layers and the top layer to be a CMYK data layer. If
you want to print second surface (e.g., transparent media viewed from the side that does
not have ink on it), then the bottom layer should be a CMYK data layer and the middle
and top layers are white flood layers.
3.
Send the job to the printer, click Layers in the printer software to verify the layer order
and then print the job.
How to Prepare a Printer Flood Fill for Varnish
1.
Open the print job in your ONYX software.
Note:
The file must be sized at the final output dimensions required for the flood area.
2.
Select Print Varnish With: Flood Coat (Printer).
Varnish can be set up at any of the following locations when a job is processed:
• Defined in the media when the media is created - Mode Options
• Selected in a Quick Set - Media Options
• Modify the printer settings of a processed job in RIP Queue - right-click the job, edit
printer settings.
Chapter 9 - How to Work With White Ink and Varnish 158
How to Select a Printer Flood Fill