Oce Arizona 400 Series GT, Руководство пользователя

Страница: 115 / 270

A: Load Supply Media Roll On a Media Shaft
1.
Place an empty media shaft on a suitable flat work area, positioned as shown, so that the
5mm hex key is inserted on the right side of the shaft to lock and unlock the core locks.
[76] Unlock the Media Shaft Core Locks
2.
To unlock the media shaft core locks (1) turn counter-clockwise with the supplied 5mm
hex key (2).
3.
Slide a new roll of media onto the supply shaft.
4. Roughly center the roll on the shaft, and then insert the shaft into the Supply (bottom)
position on the printer. Insert one end of the shaft at a time.
Note:
Load the shaft with the core lock and coupler end on the right side of the printer.
Chapter 7 - How to Operate the Roll Media Option 115
How to Load Media