Océ imagePRESS C7010VPS series, Техническое руководство

Страница: 85 / 362

The supported values for /ReadingOrientation:
/ReadingOrientation Description
(portrait) StapleLocation is defined relative to a portrait
page
(landscape) StapleLocation is defined relative to a land-
scape page
The stapling is handled as follow:
• ReadingOrientation can be the strings (portrait) or (landscape).
When using any of the string values, ReadingOrientation must also be provided. If
ReadingOrientation is omitted, the orientation defined by PageSize is used. The PageSize-
defined orientation might not produce the desired result.
Note: There are several ways of expressing the same physical staple location. For example
(portrait) and (TopLeft) is equivalent to (landscape) and (TopRight) in terms of physical
stapling, feed edge and applied rotation.
• The staples are always placed on the trailing edge of the paper, therefore the sheets are
oriented accordingly.
For example:
- portrait/TopDual requires short edge feed paper
- portrait/RightDual requires long edge feed paper, but rotated 180 degrees.
Single stapling is possible for all locations in long edge feed without loss of productivity.
• The angle of the corner staples is not controlled by PRISMAsync. All corner staples are placed
at the same angle.
Example
How to select double stapling with the StapleDetails:
% -------------- Double Staple ------------------
<< /Staple 2
/StapleDetails
<< /Type 16
/StapleLocation 3
>>
>> setpagedevice
Staple
Chapter 5 - Adobe® PostScript® 3™ 85
imagePRESS C7010VPS series v2.2