Océ imagePRESS C7010VPS series, Техническое руководство

Страница: 78 / 362

For example, if /MediaType (Tab sheet) is used in combination with /InsertSheet true, the result is
an inserted tab sheet. And for products supporting the media catalogue, the media name will be
‘Tab sheet’.
Example
The way to set the insert sheet in PS by using the /InsertSheet parameter is like this:
% -------------- Insert Sheet ------------------
<< /InsertSheet true >> setpagedevice
% showpage will from now on create insert sheets
showpage
<< /InsertSheet false >> setpagedevice
% ----------------------------------------------
CycleLength
Cycle length can be selected through the parameter /CycleLength of the setpagedevice operator.
The /CycleLength setting can be any positive integer value, not including 0.
Cycle length indicates whether media consist of ordered sequences of distinguishable sheets, for
example pre-printed sheets forming sets of a front page and N chapter separator sheets. In this
example the cycle length would be N+1. This information can be used by a printer engine during
recovery of a paper jam, when one or more sheets of this “cyclic” media are lost in the jam.
PrePunchCount
Punch count can be selected through the parameter /PrePunchCount of the setpagedevice
operator. The /PunchCount setting can be any non-negative integer value. Punch Count specifies
the number of holes present in pre-punched (“drilled”) media. The value 0 is used to specify
media without holes.
Feed orientation selection
The feed direction of sheets that can be both LEF and SEF are selected based on finishing options
activated for that sheet. For example, folding or short-edge stapling/punching will require SEF. If
no restrictions, LEF is chosen, since LEF is the most productive.
Media selection
78 Chapter 5 - Adobe® PostScript® 3™
imagePRESS C7010VPS series v2.2