Océ imagePRESS C7010VPS series, Техническое руководство

Страница: 201 / 362

Case of alert (1) (2) Group Index Code
Operator intervention
required C T Other 1 other
"Operator intervention required"
NOTE
This alert is set when
a critical alert is repor-
ted.
Legenda:
(1) = Severity level
(2) = Training level
W = warning
C = Critical
T = Trained
U = Untrained
S = Service
For all these alerts, details are available on the console.
prtAlertIndex
Access: read only item.
This index starts at one for the first alert and is incremented for each new alert. It is allowed to
wrap around to 0 when the maximum value has been reached. It is an in-core value, initialised
after each (cold/warm) boot of the controller.
prtAlertSeverityLevel
Access: read only item.
The possible alert levels are:
• other(1)
• criticalBinaryChangeEvent(3)
• warningBinaryChangeEvent(5)
All the identified alerts are associated with a severity level of 3 or 5. Value 1 (other) is not used.
prtAlertTrainingLevel
Access: read only item.
The possible training levels are:
• other(1)
• unknown(2)
• untrained(3)
• trained(4)
• fieldService(5)
• management(6)
• noInterventionRequired(7)
Each identified alert has an associated training level stored in the database.
For instance, toner low has value 'trained' (4).
prtAlertTableGroup
Chapter 9 - SNMP 201
imagePRESS C7010VPS series v2.2