Océ imagePRESS C7010VPS series, Техническое руководство

Страница: 273 / 362

@EndOfBundleItem Description
True The last page in the RunList partition is the last page of a BundleI-
tem.
Default value for the last RunList partition.
An InsertSheet with @IncludeInBundleItem="New" MAY be speci-
fied after this RunList partition.
Syntax
XPath: //LayoutPreparationParams/InsertSheet/@IncludeInBundleItem
Type
Enumeration
Supported values
@IncludeInBundleItem Description
None (default) This InsertSheet is not included in a new BundleItem. It is part of
the same BundleItem of the RunList partition to which it is associ-
ated, even if @EndOfBundleItem=”true”.
New A new BundleItem is created. Unless it is an InsertSheet before the
first page, A RunList partition with @EndOfBundleItem=”true”
MUST be specified before it.
Before This InsertSheet is included in the BundleItem that occurs before
this InsertSheet. An InsertSheet with attribute @IncludeInBundleI-
tem=”New” MUST be specified before it.
Description
Only GatheringParams, StitchingParams and FoldingParams can be partitioned either with
RunIndex or with BundleItemIndex.
NOTE
BundleItemIndex must not be used when RunIndex partition is possible. The BundleItemIndex
must only be used when InsertSheets must be finished independently from the RunList pages.
RunList/@EndOfBundleItem is used to define BundleItem for logical pages of the document
defined by RunList.
InsertSheet/@IncludeInBundleItem is used to define BundleItem for the physical extra sheets
defined by InsertSheets
BundleItems are numbered starting at 0. BundleItemIndex is a range list referring to BundleItems
numbers and NOT to logical pages or sheets. Negative values are NOT allowed for
BundleItemIndex.
A new Bundeltem is defined with BundleItemIndex values increased by 1 when one or both of the
following occurs:
• RunList/@EndOfBundleItem=”true”,
• InsertSheet/@IncludeInBundleItem="New".
InsertSheets with @IncludeInBundleItem=”None” are considered as part of the same BundleItem
to the associated RunList partition, even if @EndOfBundleItem=”true”. So, if
@EndOfBundleItem=”true” is defined in a RunList partition, Trailing InsertSheets after it will NOT
be separated in a new BundleItem if @IncludeInBundleItem=”None”. The new BundleItem will be
created just after these InsertSheets.
Partitioning for subset/page programming
Chapter 10 - JDF interface specification 273
imagePRESS C7010VPS series v2.2