Copyright 2010-2017 Obihai Technology, Inc.
268
MediaLoopbackAnswerDelay
Delay in milliseconds before the device answers an
incoming media loopback call
0
MediaLoopbackMaxDuration
Maximum duration in seconds to allow for an
inbound media loopback call. Set the value to
blank or 0 to make it unlimited
0
RepeatDialInterval
Interval in seconds between redial in a repeat dial
operation.
30
RepeatDialExpires
Duration of time in seconds when a repeat dial
operation remains active.
1800
MOHServiceNumber
A number to call and bridge to get some audio
played when the phone user holds the call
PlaySITOnCallFailureCodes
Specify which INVITE failure response codes will
trigger the OBi to play SIT tone to alert the phone
user. It must be specified with a valid digitmap
format. If nothing valid is specified, the OBi plays
normal reorder tone when the outbound call fails.
(404|9xx)
InvalidNumberAnnouncementOption
Option to play an announcement of the error
when user dials an invalid number
Admissable Values:
SIT_ONLY
DEFAULT_ONLY
SIT_AND_DEFAULT
CUSTOM_ONLY
SIT_AND_CUSTOM
SIT_ONLY
CustomInvalidNumberAnnouncemen
t
The custom announcement to play when user
dials an invalid number
CallRemovalDelayOnPeerEndCall
Number of seconds to delay removal of the call
from the screen when the far end ends the call.
During that delay, reorder tone will be played if
the call was connected (active) when it was ended
0
MergeConfereeCalls
A boolean option to enable of the grouping all the
active conferee calls into a single call item and not
showing each individual conferee call items on
screen. The call state of this virtual call item is
always
Conferencing
.
Pressing the
End
soft key on this special call item
ends all the conferee calls. Pressing the
Split
or
NewCall
soft key splits it up into individual
conferee call items on screen while placing each
conferee call on hold. Pressing
Join
soft key let
the user drops out of the conference while
transferring one conferee to the other so they can
continue with the conversation.
false
TransferOnHangUpConference
A boolean option to enable transferring one
conferee call to the other (in other words, Join the
two conferees) when hanging up on a merged
conference call. Otherwise, all the conferees are
ended just like pressing the
End
soft key.
Hanging up means either on-hook the handset
while using the handset, turn off the
speakerphone while using the speakerphone, or
turn off the headset while using a headset.
false