Obihai Technology OBi1032 Скачать руководство пользователя страница 50

Страница: 50 / 287

Transfer

Invoke the call transfer function on the currently highlighted call on the screen
when the Calls App is at the top of the display stack. The call must be in a
transferrable state, that is, Holding or Connected State.

Parameters:
-

Service: Optional. The suggested service to use to make the call to the transfer

target, if the Number parameter is also specified
-

Number: Optional. The number of the transfer target to call. User will not be

prompted to enter the transfer target number if this parameter is specified

Blind Transfer

Invoke the blind call transfer function on the currently highlighted call on the
screen when the Calls App is at the top of the display stack. The call must be in a
transferrable state, that is, Holding or Connected State.

Parameters:
-

Number: Optional. The number of the transfer target to transfer the call to.

User will not be prompted to enter the transfer target number if this parameter
is specified

Blind Transfer 2

Same as the

Transfer

function w.r.t. collecting the target number from the user,

but a blind transfer is performed after the target number is collected. In
contrast to

Blind Transfer

Blind Transfer 2

plays dial tone, applies digit map,

and would time out as user enters the target number

Action URL

Launch an OBiPhone XML Application at the given URL

Parameters:

Number: Required. The URL of the OBiPhone XML Application to run

Name: A name to identify the application on the phone screen

Every feature key has a corresponding

Feature Key Item

that can be viewed from the phone GUI. As each feature key

belongs to one of four

feature key groups

(Line Keys, Programmable Keys, Side Car 1 Keys, and Side Car 2 Keys), feature

key items are similarly grouped and ordered in their corresponding feature key item lists on screen, where there is one
feature key item list for each of the four feature key groups. The easiest way to bring up the Feature Key Item is by
pressing and holding down the corresponding feature key until the feature key item list appears on the screen with the
pressed key item highlighted; the normal function that is assigned to the feature key is not be triggered in this case.
With the Feature Key Item, user can view additional information about the assigned function and invoke other
operations (via soft key options for example) that are not accessible by a simple key press of the feature key itself. You
can also access the feature key item lists by going through the Settings menu on the phone GUI.

Line Keys and Virtual Line Keys

There are 6 physical Line Keys (LKs) on the OBi1062/2182 (3 on the OBi1032/2062/2162 and 5 on the OBi1022). Four (4)

“tabbed” pages

(2 on the OBi1022) of Virtual Line Key (VLK) are defined such that under each tab there are 6

corresponding virtual line keys (3 on OBi1032 and 5 on the OBi1022). Hence a total of 24 VLKs (12 on OBi1032 and 10
on OBi1022) are available per phone. The VLK tabs are numbered 1

–

4 (1

–

2 on the OBi1022), where one and only one

VLK tab is visible on the screen at any time, the 4 Tab icons (2 on the OBi1022) on the status bar of the screen makes it
clear which tab of VLKs is currently on the top. The VLKs themselves are numbered as 1

–

24 (1

–

12 on

OBi1032/2062/2162 and 1

–

10 on OBi1022) such that LK1

–

LK6 are mapped to VLK1

–

VLK6 under Tab 1, to VLK7

–