Copyright 2010-2017 Obihai Technology, Inc.
250
account userid). If user is specified, it will be used as the userid
in the Request-URI and TO header.
SIP messages for keep-alive are sent only once without
retransmission; response to the SIP messages are ignored by the
OBi.
X_UserAgentPort
UDP port where the device sends and listens for SIP messages
5060
X_UserAgentPorts
A comma separated list of (up to 10) alternative user agent
ports to use when there is no response received from the SIP
Registrar
DirectoryNumber
Directory number associated with this service
X_DefaultRing
Default ring pattern number to ring the PHONE port for
incoming calls on this trunk that are routed to the PHONE port
according to the InboundCallRoute of this service. The ring
pattern is taken from the selected Ring Profile. Valid choices are
1-10
1
X_CallOnHoldRing
Pattern to ring PHONE port when holding a call on this trunk
that has been connected to the PHONE port. Typically this is a
very short distinctive ring pattern that serves as a reminder to
the user that a call is being on hold. The ring pattern is taken
from the selected Ring Profile. Valid choices are: NO Ring, or 1-
10
8
X_RepeatDialRing
The ring pattern number to use to ring the PHONE port when a
repeat dial operation on this trunk is successful as the called
party is either ringing or answered
5
X_BargeInRing
Call Waiting Ring pattern to ring the PHONE port when the
incoming call is requesting to barge-in. This is applicable in a
call-waiting scenario on the PHONE port
4
X_CallParkedRing
Ring pattern to ring the PHONE port only as a reminder that
there are some calls parked in the parking lot. This feature is
applicable only in an OBiPLUS solution.
10
X_SipDebugOption
Enable sending of SIP signaling debug information to the syslog
server (if one is configured on the device). Available choices are:
Disable (do not send SIP signaling debug information)
Log All Messages
Log All Except REGISTER Messages
Disable
X_SipDebugExclusion
A list of SIP methods to exclude from the syslog for this SP
service. For example:
notify, subscribe
X_SatelliteMode
Enable satellite mode on this trunk. In this mode, the user must
explicitly sign on (using * code) to receive phone calls on this
trunk. The SIP REGISTER sent by the OBi to the ITSP on this trunk
will indicate if the user wants to sign on (and therefore takes
over the incoming calls for this account). This feature is only
applicable if the service is provided by an OBiPLUS system
false
X_AcceptResync
Control whether to accept a SIP NOTIFY request with
event=resync to trigger a reboot of the device (so it can
download new f/w or configuration upon boot up). Available
yes without authentication
