Oberheim OB 12, Руководство по эксплуатации

Страница: 98 / 127

OB 12
Z-Domain Synthesizer
218
•
TIME SIGN.
(Time Signature)
: sets the time signature of the recording to be made. The values
available are: 2/4, 3/4, 4/4, 5/4, 3/8, 5/8, 6/8, 7/8, 9/8, 12/8.
•
METR.STATUS
(Metronome Status)
: if this parameter is set as ON, the metronome will be audible
throughout the recording phase. If PREC is selected, the metronome will only be heard in the
Precount phase, i.e. the bar inserted by the instrument before recording starts. Lastly, with
OFF selected the metronome will be disabled.
•
METRON.LEVEL
(Metronome Level)
: regulates the metronome level.
You can use button [F1], assigned to the CLEAR function, to delete the Motion displayed by the
MOTION LOCATION parameter. When the above key is pressed, the display will ask confirmation
before proceeding:
As the display indicates, pressing the [ENTER] key deletes the Motion, while the [ESC] button can
be pressed to abort the deletion procedure.
If the contents of the Motion are deleted, the display will show the operation by displaying the pop-
up menu:
From the previous video page, pressing button [F2] associated to the GO! function starts the
recording procedure.
One very important feature of the Motion Recorder is that, as well as moving the controls you wish
to record, you can also play on the keyboard in order to check the quality of the Motion immediately.
N.B.: Only “continuous” controls, i.e. trimmers and/or sliders, can be saved in a Motion. This
means that the pressing of a button will not be recorded.
If the GO! function is then selected, the instrument will enable recording and the display will show:
You can now select the START using the [F2] button to start recording: