Oberheim OB 12, Руководство по эксплуатации

Страница: 90 / 127

OB 12
Z-Domain Synthesizer
210
•
LAYER STAT.
(Layer Status)
: if this parameter is set as PROGRAM, during recording you can
play (but not record) the phrase bearing in mind the Program settings (Part, Split / Layer,
Effects, etc...). If TMB-SOLO is selected, the phrase will be played with the Timbre sounds
current at that moment.
•
METR.STATUS
(Metronome Status)
: if this parameter is set as ON, the metronome will be audible
throughout the recording phase. If PREC is selected, the metronome will only be heard in the
Precount phase, i.e. the bar inserted by the instrument before recording starts. Lastly, with
OFF selected the metronome will be disabled.
•
METR.LEVEL
(Metronome Level)
: regulates the metronome level.
You can press button [F3] to select the CLEAR function to delete the contents of the Phrase
currently selected (assigned to the key indicated by the TRIGGER NOTE parameter and present
in the set defined by the PHRASE SET field). The display will then request confirmation to proceed
by means of the following video page:
As the display indicates, if the [ESC] button is pressed the procedure will be aborted, while pressing
[ENTER] confirms it. In this case the display will inform the user that the data in the Phrase are
being deleted:
If the GO! function is selected using the [F4] button, the recording procedure will be started. The
display will show:
The START command can now be selected using the [F2] button to start recording:
The CURRENT MEASURE parameter shows the numbers of the bars as they pass ((useful during
over-recording to allow optimum placing of any added notes), while the TEMPO field indicates the
metronome tempo for the recording.
The screen also contains the STOP ([F2]) command for stopping the recording and CLEAR ([F3])
for deleting the data present when the key itself is pressed.
If RESET (button [F1]) is selected, the recording will be returned to bar 1.1.