Oberheim OB 12, Руководство по эксплуатации

Страница: 92 / 127

OB 12
Z-Domain Synthesizer
212
You can use the function keys to perform the functions described on the display in relation to the
selected note.
Therefore, button [F1] enables the CLEAR function, used to delete the selected note event. The
display will then request confirmation before proceeding:
As the Pop-Up menu states, if the [ENTER] is pressed, the note event will be deleted, while [ESC]
will abort the deletion command.
Button [F2] is associated to the CHANGE command allowing you to change the value of the
parameters relating to the selected note event. After this button is pressed, the display will show a
cursor on the position value of the note
If the cursor is located in the first column (default when the function is accessed), you can vary the
position of the note event within the Phrase. After using the [CURSOR] keys to locate the cursor in
the second column, you can change the identity of the note, in the third column you can change its
dynamic and in the fourth column the duration.
To modify this parameters you can use also the keys of the keyboard.
Press [ENTER] to confirm the settings made or the [ESC] button to abort the function.
Another function available in this video page can be recalled using button [F3] (INSERT), and
allows another note event to be inserted in the musical phrase.
Therefore, when this button is pressed, an event will be inserted (before the note currently selected)
with:
•
note identity: C4
•
dynamic: 127
•
duration: 96
You can then use the CHANGE command to vary the above values and set the event you require.
As for the other functions, use the [ENTER] to confirm the operation or the [ESC] button to abort
the insertion of the note event.
After making the changes you require, select the DONE command with the [F4] button to save
them, or press [ESC] to abort.