Oberheim OB 12, Руководство по эксплуатации

Страница: 100 / 127

OB 12
Z-Domain Synthesizer
220
•
The second column indicates the trimmer / slider whose movement has been recorded;
•
The third column displays the value assumed by the control at that moment.
The encoder or the [CURSOR] keys can be used to scroll through all the events and select the one
you require, setting it in the display zone in reverse.
You can use the function keys to perform the functions described on the display in relation to the
selected note.
Therefore, button [F1] enables the CLEAR function, used to delete the selected note event. The
display will then request confirmation before proceeding:
As the Pop-Up menu states, if the [ENTER] key is pressed, the event will be deleted, while [ESC]
will abort the operation.
You can use button [F2] to enable the CHANGE command allowing you to change the value of the
parameters relating to the selected event. After this button is pressed, the display will show a
cursor on the position value of the event:
If the cursor is located in the first column (default when the function is accessed), you can vary the
position of the event within the Motion. After using the [CURSOR] keys to locate the cursor in the
second column, you can change the type of control recorded, while in the third column you can
change the value assumed by the control in the selected moment of time.
To modify this parameters you can use also the controls on the front panel.
Press [ENTER] to confirm the settings made or the [ESC] button to abort the function.
Another function available in this video page can be recalled using button [F3] (INSERT), and
allows another note event to be inserted in the Motion.
When this button is pressed, a movement of the LFO1 section [RATE] trimmer with value 50 will
be inserted (before the event currently selected).
You can then use the CHANGE command to vary the above values and set the event you require.
As for the other functions, use the [ENTER] to confirm the operation or the [ESC] button to abort
the insertion of the event.
After making the changes you require, select the DONE command with the [F4] button to save
them, or press [ESC] to abort.