Oberheim OB 12, Руководство по эксплуатации

Страница: 84 / 127

OB 12
Z-Domain Synthesizer
9.7 ARPEGGIO SETTINGS
204
By selecting the PEDAL2 folder you can assign the function of choice to the pedal connected to
the rear PEDAL [EXP.2] connector. The video page will be identical to that relating to the PEDAL1
setting.
The ARPEGGIO function allows arpeggios to be performed by playing a chord on the keyboard or
pressing just one note and creating octave arpeggios on it.
The HOLD function (activated using the button of the same name in this section) allows you to play
arpeggios even after the keyboard notes have been released. Notes played subsequently will
replace the previous ones with the arpeggio mode active.
You can therefore use regular arpeggios, by selecting the beat required, or irregular arpeggios, for
which there are a choice of Patterns.
This section of the Program environment allows you to set the modes, the range in octaves and
the tempo of the arpeggio, and the keyboard section and Parts affected by the function.
This section is independent of the PART SETTINGS: the arpeggio notes will be performed with the
Timbres present in the Parts enabled for the function.
From the EDIT PROGRAM MENU select field 6-ARPEGGIO. The display will show the first video
page relating to the settings of this function:
SELECTIONS
CONTROLLED
PARAMETERS CONTROLS ON
PANEL
SELECTIONS
CONTROLLED
PARAMETERS
CONTROLS ON
PANEL
FILT.RES.
resonance of FILTERS
[RESONANCE] of
FILTERS
AMPL.REL.
release time of the
AMPLIFIER envelope
[RELEASE] of
AMPLIFIER
FILT.ATTACK
attack time of the
FILTERS envelope
[ATTACK] of FILTERS
AMPL.AMOUNT
Timbre level
[AMOUNT] of
AMPLIFIER
FILT.DECAY
decay time of the
FILTERS envelope
[DECAY] of FILTERS AMPL.LFO1DP
modulation depth of
LFO1 on AMPLIFIER
[LFO1 DEPTH] of
AMPLIFIER
FILT.SUST.
sustain level of the
FILTERS envelope
[SUSTAIN] of FILTERS LFO2 RATE LFO2 signal frequency [RATE] of LFO2
FILT.REL.
release time of the
FILTERS envelope
[RELEASE] of
FILTERS
LFO2 DP.OS1
modulation depth of
LFO2 on OSC.1
[MODULATION]
FILT.ENV.DP
FILTERS envelope
depth
[ENV DEPTH] of
FILTERS
LFO2 DP.OS2
modulation depth of
LFO2 on OSC.2
[MODULATION]
FILT.LFO1DP
modulation depth of
LFO1 on OSC.1
[LFO1 DEPTH] of
FILTERS
LFO2 DP.FLT
modulation depth of
LFO2 on FILTERS
[MODULATION]
AMPL.ATTACK
attack time of the
AMPLIFIER envelope
[ATTACK] of
AMPLIFIER
LFO2 DP.AMP
modulation depth of
LFO2 on AMPLIFIER
[MODULATION]
AMPL.DECAY
decay time of the
AMPLIFIER envelope
[DECAY] of
AMPLIFIER
PORTAM.TIME
Portamento time
[TIME] of
PORTAMENTO
AMPL.SUST.
sustain level of the
AMPLIFIER envelope
[SUSTAIN] of
AMPLIFIER
the parameters this video page contains are the following:
•
STATUS
(Arpeggio Status, [ON/OFF] in the ARPEGGIO section)
: activates (ON) or disables (OFF) the
Arpeggio function.