Oberheim OB 12, Руководство по эксплуатации

Страница: 22 / 127

OB 12
Z-Domain Synthesizer
142
The PHRASE RECORDER section [TEMPO] trimmer and [TAP TEMPO] button can be used to
regulate the metronome tempo for repetition of the Motion. If the Phrase Recorder is already
active, the Motion repetition tempo will be affected by the values set for the Phrase Recorder.
THE MORPH
You can use the MORPH automated function to move from a starting Program to another
(destination) Program in a period of time which can be programmed or controlled using the
[MODULATION] wheel, during which all the parameters which differ in the two Programs are
interpolated (i.e. varied continuously).
Point 9.8 of this manual describes all the display procedures for programming this function.
To Morph Programs or Timbres, simply select the operating environment associated to them by
pressing the [PROGRAM] and [TIMBRE] buttons in the front panel MODE&SET-UP section.
The Morph section comprises three buttons:
•
[AUTO]: button used to enable the automatic Morph,
which will be displayed by illumination of the button
LED. When the relative key is pressed again, the
function is disabled and the LED goes out.
•
[MANUAL]: button used to enable the manual Morph
function; the button LED then illuminates to display
the selection made. Pressing the button again disables
the automatic function and the LED goes out.
•
[ENABLE]: key pressed to start the Morph function (automatic or manual). Pressing the button
again will interrupt or restart the Morph.
N.B.: If no manual or automatic Morphs have been selected, pressing the [ENABLE] button has
no effect.