Oberheim OB 12, Руководство по эксплуатации

Страница: 19 / 127

OB 12 Z-Domain Synthesizer
139
•
[TAP TEMPO]: this button allows you to set the
metronome tempo of the arpeggio by pressing the
button itself. The LED on the button displays the current
metronome tempo, and if the key is pressed twice, the
OB-12 will calculate the time between one press and
the next in order to set the arpeggio tempo. If a remote
MIDI CLOCK source is connected the value of this
parameter will be that specified by the MIDI message.
Any manual settings will be ignored.
•
[HOLD]: this button allows the user to enable the HOLD
function, by means of which the OB-12 will perform
the arpeggio even after the keyboard keys have been
released. With the function disabled, when the
keyboard keys are released the arpeggio will cease.
The button LED displays the status of the function in
accordance with the following rule:
-
LED on: function active
-
LED off: function disabled
With the function active, if another note or another chord is played after the one on which the
instrument is playing the arpeggio, the new notes will replace the ones on which the arpeggio
was previously based.
•
[ON/OFF]: button for enabling or disabling the Arpeggio function. The button LED displays
the status of the function in accordance with the following rule:
- LED on: function active
- LED off: function disabled
If this button is pressed for at least two seconds, the Arpeggio setting video page will be
displayed.
•
[MODE]: this button allows selection of the arpeggio mode. The settings available are:
-
UP: the arpeggio is performed cyclically from the lowest to the highest note.
- DOWN: the arpeggio is performed cyclically from the highest to the lowest note.
-
UP & DOWN (UP and DOWN LEDs on): the arpeggio is performed cyclically from the lowest
to the highest note and vice-versa.