NXP Semiconductors MPC5566 Скачать руководство пользователя страница 766

Страница: 766 / 1268

Enhanced Time Processing Unit (eTPU)

MPC5566 Microcontroller Reference Manual, Rev. 2

Freescale Semiconductor

18-9

— A host service request allows activation of a channel thread by the device core request.

— Each channel has an event mechanism that supports single and double action functionality in

various combinations. It includes two 24-bit capture registers, two 24-bit match registers,
24-bit greater-equal or equal-only comparator.

•

Two independent 24-bit time bases for channel synchronization

— The first time base can be clocked by the system clock with programmable prescaler division

from 2 to 512 (in steps of 2).

— The first time base can also be clocked by an external signal with programmable prescaler

divisions of 1 to 256.

— The second time base can be clocked by an external signal with programmable prescaler

divisions from 1 to 64 or by the system clock divided by 8.

— The second time base has a programmable prescaler that applies to all TCR2 clock inputs

except the angle counter.

— The second time base counter can work as an angle counter, enabling angle-based applications

to match angle instead of time.

— The second time base can alternatively be used as a pulse accumulator gated by an external

signal.

— Either time base can be written or read by either eTPU engine at any time.

— Either time base can be read, but not written, by the host.

— Both time bases can be exported or imported from engine to engine through the STAC (shared

time and counter) bus.

NOTE

An engine cannot export or import to or from itself. An engine cannot
import a time base and/or angle count if it is in angle mode.

•

Event-triggered RISC processor (microengine)

— 2-stage pipeline implementation (fetch and execution), with separate instruction memory

(SCM) and data memory (SDM).

— Two-system-clock microcycle fixed-length instruction execution for the ALU.

— 20 KB of shared code memory (SCM).

— Interleaved SCM access in dual-engine eTPU (MPC5566) avoids contention in time for

instruction memory.

— 4 KB of shared data memory (SDM)

— Interleaved SDM access in dual-engine eTPU (MPC5566) avoids contention in time for

instruction memory.

— Instruction set with embedded channel support, including specialized channel control

subinstructions and conditional branching on channel-specific flags.

— Channel-oriented addressing: channel-bound address mode with host configured channel base

address allows the same function to operate independently on different channels.

— Channel-bound data address space of up to 128 32-bit parameters (512 bytes).

Содержание MPC5566





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание MPC5566

Отзывы:

Бренды по названию

Популярные бренды

NXP Semiconductors MPC5566, Справочное руководство

Результаты поиска

Содержание MPC5566

Отзывы:

Бренды по названию

Популярные бренды