manualshive.com logo in svg

NXP Semiconductors MPC5566, Справочное руководство

Поделиться
Скачать
NXP Semiconductors MPC5566 Скачать руководство пользователя страница 147

e200z6 Core Complex

MPC5566 Microcontroller Reference Manual, Rev. 2

3-12

Freescale Semiconductor

 

3.2.2

Core-Specific Registers

The Power Architecture embedded category allows implementation-specific registers. 
Implementation-specific registers incorporated in the e200z6 core are described in this section.

3.2.2.1

User-Level Registers

The user-level registers can be accessed by all software with either user or supervisor privileges. They 
include the following:

•

Signal processing extension APU status and control register (SPEFSCR). The SPEFSCR contains 
all fixed-point and floating-point exception signal bits, exception summary bits, exception enable 
bits, and rounding control bits needed for compliance with the IEEE 754 standard.

•

The L1 cache configuration register (L1CFG0). This read-only register allows software to query 
the configuration of the L1 unified cache.

3.2.2.2

Supervisor-Level Registers

The following supervisor-level registers are defined in the e200z6 core in addition to the Power 
Architecture embedded category registers described previously:

•

Configuration registers

— Hardware implementation-dependent 0 (HID0) controls processor and system functions.

— Hardware implementation-dependent 1 (HID1) controls processor and system functions.

•

Exception handling and control registers

— Debug save and restore registers (DSRR0, DSRR1). DSRR0 holds the effective address for the 

instruction at which execution resumes when an 

rfdi

 instruction is executed at the end of a 

debug interrupt handler routine. DSRR1 is used to save machine state on a debug interrupt, and 
stores the MSR register contents. The MSR value is restored when an 

rfdi

 instruction is 

executed at the end of a debug interrupt handler routine. 

— When enabled, the DSRR0 register is used to save the address of the instruction at which 

execution continues when 

rfdi

 executes at the end of a debug interrupt handler routine.

— Interrupt vector offset registers (IVOR32–IVOR34). These registers provide the address of the 

interrupt handler for different classes of interrupts.

•

Debug facility registers

— Debug control register 3 (DBCR3) controls for debug functions not described in the 

Power Architecture embedded category.

— Debug counter register (DBCNT) provides counter capability for debug functions.

Содержание MPC5566





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды