manualshive.com logo in svg

NXP Semiconductors MPC5566, Справочное руководство

Поделиться
Скачать
NXP Semiconductors MPC5566 Скачать руководство пользователя страница 758

MPC5566 Microcontroller Reference Manual, Rev. 2

Freescale Semiconductor

18-1

Chapter 18  
Enhanced Time Processing Unit (eTPU)

18.1

Introduction

The enhanced time processing unit (eTPU) operates in parallel with the MPC5566 core (CPU) to:

•

Execute programs independently from the host core 

•

Detect and precisely record the timing of input events

•

Generate complex output waveforms

•

Enhances the CPU with time processing without requiring real-time host processing 

The host core setup and service times for each input and output event are greatly minimized. The 
MPC5566 contains two eTPUs. 

The eTPU improves the performance of the device by providing high-resolution timing:

•

eTPU dedicated channels include two match and two capture registers (TPUs had one). 

•

eTPU engines are optimized to service channel hardware 

•

Fast instruction execution rate of the eTPU engine reduces service time

Because responding to hardware service requests is primarily done by the eTPU engine, the host is free to 
handle higher level operations. 

18.1.1

eTPU Implementation

For more detailed information regarding the eTPU module and compiler, refer to the 

Enhanced Time 

Processing (eTPU) Reference Manual.

 This chapter provides an overview of the eTPU module:

•

4 KB of shared data memory (SDM). This memory is also referred to as eTPU shared parameter 
(SP) RAM, or (SPRAM).

•

20 KB of shared code memory (SCM).

•

MPC5566 has two eTPU engines: eTPU A and eTPU B

•

The eTPU debug interface is built into the device’s debug module. Refer to Section 10.2.1 of the 

eTPU Reference Manual

 for details on eTPU debug. 

•

Data transfer requests are implemented to each eTPU engine: eTPU A has five DMA requests; 
eTPU B has 12 DMA requests.

•

I/O channel pairs can be shared on a common pin. The output buffer enable (OBE) is not used in 
the device. The outputs are enabled in the SIU; refer to 

Chapter 6, “System Integration Unit (SIU)

.”

Содержание MPC5566





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды