manualshive.com logo in svg

NXP Semiconductors MPC5566, Справочное руководство

Поделиться
Скачать
NXP Semiconductors MPC5566 Скачать руководство пользователя страница 702

Enhanced Modular Input/Output Subsystem (eMIOS)

MPC5566 Microcontroller Reference Manual, Rev. 2

Freescale Semiconductor

17-23

 

The four components of the eMIOS module are:

•

Bus interface unit

•

STAC client submodule

•

Global clock prescaler

•

Unified channels and their modes of operation

17.4.1

Bus Interface Unit (BIU)

The bus interface unit provides the interface between the internal bus and the slave interface, allowing 
communication among all submodules and the slave interface. The BIU allows 8-, 16-, and 32-bit 
accesses. They are performed over a 32-bit data bus in a single cycle clock. 

17.4.1.1

Effect of Freeze on the BIU

When the FRZ bit in the EMIOS_MCR is set and the module is in debug mode, the operation of the BIU 
is not affected.

17.4.2

STAC Client Submodule 

The shared time and angle count (STAC) bus provides access to one external time base, imported from the 
STAC bus to the eMIOS unified channels. The eTPU module's time bases and angle count can be exported 
and/or imported through the STAC client submodule interface. Time bases and/or angle information of 
either eTPU engine can be exported to the other eTPU engine and to the eMIOS module, which is only a 
STAC client. There are restrictions on engine export/import targets: one engine cannot export from or 
import to itself, nor can it import time base and/or angle count if in angle mode. 

The device’s STAC server identification assignment is shown in 

Table 17-13

. The time slot assignment is 

fixed, so only time bases running at system clock divided by four or slower can be integrally exported. The 
STAC client submodule runs with the system clock, and its time slot timing is synchronized with the eTPU 
timing on reset. The time slot sequence is 0-1-2-3, such that they alternate between engines one and two.

Table 17-13. STAC Client Submodule Server Slot Assignment 

Engine

Time Base

Server ID

1

TCR1

0

1

TCR2

2

2

TCR1

1

2

TCR2

3

Содержание MPC5566





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды