manualshive.com logo in svg

NXP Semiconductors MPC5566, Справочное руководство

Поделиться
Скачать
NXP Semiconductors MPC5566 Скачать руководство пользователя страница 1045

MPC5566 Microcontroller Reference Manual, Rev. 2

22-8

Freescale Semiconductor

 

RTR

Remote transmission request. This bit is used for requesting transmissions of a data frame. If 
FlexCAN2 transmits this bit as ‘1’ (recessive) and receives it as ‘0’ (dominant), it is interpreted as 
arbitration loss. If this bit is transmitted as ‘0’ (dominant), then if it is received as ‘1’ (recessive), the 
FlexCAN2 module treats it as bit error. If the value received matches the value transmitted, it is 
considered as a successful bit transmission.
0 Indicates the current MB has a data frame to be transmitted
1 Indicates the current MB has a remote frame to be transmitted

LENGTH

Length of data in bytes. This 4-bit field is the length (in bytes) of the RX or TX data, which is located 
in offset 0x8 through 0xF of the MB space (see 

Figure 22-2

). In reception, this field is written by the 

FlexCAN2 module, copied from the DLC (data length code) field of the received frame. In 
transmission, this field is written by the CPU and corresponds to the DLC field value of the frame 
to be transmitted. When RTR = 1, the Frame to be transmitted is a remote frame and does not 
include the data field, regardless of the length field.

TIME STAMP

Free-running counter time stamp. This 16-bit field is a copy of the free-running timer, captured for 
Tx and Rx frames at the time when the beginning of the Identifier field appears on the CAN bus.

ID

Frame identifier. 
 • Standard frame format: the 11 (3:13) most significant bits (MSB) are the frame ID in receive and 

transmit frames. The 18 (14:31) least significant bits (LSB) are ignored. 

 • Extended frame format: all bits are the frame ID in receive and transmit frames.

DATA

Data field. Up to eight bytes can be used for a data frame. For RX frames, the data is stored as it 
is received from the CAN bus. For TX frames, the CPU prepares the data field to be transmitted 
within the frame.

Table 22-5. Message Buffer Codes for RX Buffers

RX Code before

RX Frame

Description

RX Code after

RX Frame

Comment

0000

NOT ACTIVE: MB is not active.

—

MB does not participate in the matching process.

0100

EMPTY: MB is active and 
empty.

0010

MB participates in the matching process. When a frame 
is received successfully, the code is automatically 
updated to FULL.

0010

FULL: MB is full.

0010

The act of reading the C/S word followed by unlocking the 
MB does not make the code return to EMPTY. It remains 
FULL. If a new frame is written to the MB after the C/S 
word was read and the MB was unlocked, the code still 
remains FULL.

0110

If the MB is FULL and a new frame is overwritten to this 
MB before the CPU had time to read it, the code is 
automatically updated to OVERRUN. See 

Section 22.4.3.1, “Matching Process

 for details about 

overrun behavior.

Table 22-4. Message Buffer Field Descriptions (continued)

Name

Description

Содержание MPC5566





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды