nVent.com
|
48
Raychem-AR-H
58686
-NGC
40
DemoUnit-EN-
1805
Example 2: Connecting NGC-40-BRIDGE and the TOUCH 1500R together via the Internet using DHCP
Below is diagram on how the NGC-
40
-BRIDGE and the TOUCH
1500
R can be connected via the Internet. You may require the assistance
from IT to complete the following steps. Before you proceed with the below, a keyboard is required. If a keyboard is not available, a virtual
keyboard can be access. Go to Start | All Programs | Accessories | Accessibility | On-Screen Keyboard.
The following only addresses local networks with DHCP. If your network does not have DHCP, you may need to manually setup an IP
address in the TOUCH
1500
which is explained in the previous example.
Step
1
:
Connect the TOUCH
1500
R and the NGC-
40
-BRIDGE to the Internet.
Step
2
:
Exit the TOUCH
1500
R program and go to Start | All Programs | Accessories | Command Prompt
Step
3
:
Type ipconfig and press enter. Take IMPORTANT of the IP Address and Subnet Mask
Step
4
:
Using a laptop computer, connect to the NGC-
40
-BRIDGE via RS-
232
. Start the RAYCHEM Hardware Manager program and
connect to the NGC-
40
-BRIDGE.
