nVent.com
|
18
Raychem-AR-H
58686
-NGC
40
DemoUnit-EN-
1805
5.2 Basic Configuration
In this section of the manual, the steps for configuring one heat-tracing circuit are presented. Please follow the configuration steps of this
circuit, as an example to get acquainted with the NGC-
40
configuration.
Step
1
–
Start the TOUCH
1500
software. The first screen that appears upon starting the program is the Circuit List.
IMPORTANT:
The NGC-
40
DEMO has two NGC-
40-HTC’s and one NGC-40
-HTC
3
module. This Section will focus on the NGC-
40
-
HTC module for both configuring and monitoring.
Step
2
–
Selecting a module from the Circuit List
Select one of the NGC-
40
-HTC modules shown in the list above. Clicking on one of the NGC-
40-HTC’s shown in the
Circuit List
will drop
down the buttons for
Overview, Alarms and Hide
.
Step
3
–
Overview
Click on the Overview Button, the following screen will appear. The overview screen shows the status of the NGC-
40
-HTC controller.
HTC
3
will show the current for
Line
1
, Line
2
and Line
3
.