nVent.com
|
12
Raychem-AR-H
58686
-NGC
40
DemoUnit-EN-
1805
SECTION –
3
LOADING NGC-
40
MODULES USING TOUCH
1500
SOFTWARE
3.1 Introduction
You must have the TOUCH
1500
software and Microsoft SQL Server Compact
3
.
5
Service Pack
2
installed on your PC before continuing
with this section. You may need Admin rights to install this program.
3.2 Selecting and Configuring the TOUCH 1500 COMM Port
Step
1
–
Start the TOUCH
1500
software. You should see the following screen:
Step
2
–
Go to the System | Communication | Field Port window. The below screen will appear:
Step
3
–
Click on the DOWN ARROW for the COM Port field to expose the COM PORTS. You must choose COMM
1
, as this document
describes it, or COM
1
as the software describes it, if using the RS-
232
port on the PC. If using a PC there may even be a COM (COMM)
2 for RS-232
. Or, if using the USB to RS-
232
cable one must choose the COM (COMM) port found in section
1
.
3
.
Step
4
–
There are no other parameters that need to be changed. Click on the OK button to enter the COM PORT.
