Nussbaum HL 2.30 NT, Инструкция по эксплуатации и документация

Страница: 40 / 54

Operating instruction and documentation
HL 2.30 NT/ HL 2.40 NT
- 40 -
• Loosen and remove the dowels.
• Transport the lift to the new installation place.
• Install the lift in accordance with chapter 8 “ Installation and Initiation”
Use new dowels, the used dowels can not be used anymore.
9. Security check
The security check is necessary to guarantee the safety of the lift during use. It has to be
performed in the following cases:
1. Before the initial operation, after the first installation.
Use the form “First security check before initiation”
2. In regular intervals after the initial operation, at least annually.
Use the form “Regular security check at least annually”
3. Every time the construction of that particular lift has been changed.
Use the form “Extraordinary security check”
The first and the regular security check must be performed by a competent person. It
is also recommended to carry out a service on the lift at this time.
After the construction of the lift has been changed (changing the lifting height or
capacity for example) and after serious maintenance works (welding load bearing
parts) an extraordinary security check must be performed by an expert.
This manual contains forms with a schedule for the security checks. Please us the appropriate
forms for the security checks. The forms should remain in this manual after they have been
filled out. A short description about special safety devices follows.