Section 7
Service
Alpha Fuzion Sauna Body Pod
75
8. Attach six-pin connector to loop and draw up through speaker opening. Detach
connector from loop.
9. Make all connections as follows:
•
Six-pin connector of long wire to matching receptacle of headphone jack
harness.
•
Six-pin connector of short wire to rear of main power box.
•
Two spade terminals to screws of telephone/computer jack in cavity of
Lower Chassis Power Box area, near power input IEC plug as shown in
Figure 7.23.7
Inserting Hook to the Face Fan Opening.
10. Affix black connector to base chassis in 1” hole to the right of main hinge using
four screws and a Phillips Head screwdriver.
DO NOT OVERTIGHTEN.
11. Connect Quick-Connect end of Display Harness (from hood) to base chassis
connector, and turn outer ring to lock in place.
12. Reinstall:
•
Headphone jack with PC board
•
Left side speaker and grill
•
Face fan assembly
•
Main power box
13. Select and initiate any program to test Alpha Fuzion Sauna Body Pod for proper
function.
•
Headphone PC Board Extension Cable Removal Steps:
1. Remove face fan assembly (See Section 7.17).
2. Remove stereo speakers and grills (See Section 7.18).
3. Disconnect wire connectors from speaker terminals (2 each).
4. Place fingers through vacated opening of left speaker and behind small PC board
of headphone jack to support this part. Loosen mounting ring of headphone jack
using a needle-nose pliers or similar tool. When ring is off, remove headphone
jack PC board and pull out through speaker opening, pulling entire harness along
with it. Disengage headphone harness six-pin connector from lower harness.
Prevent lower harness six-pin connector from dropping down into base cavity.
Save for reconnection. Take care not to lose small mounting ring.
5. Grasp headphone jack PC board and pull away from unit, pulling all speaker wires
through left speaker opening.
Содержание Alpha Fuzion
Страница 1: ...206507 NA AF 10 0813 2 U...