NuAge Beauty Alpha Fuzion Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 103

NuAge Beauty Alpha Fuzion Скачать руководство пользователя страница 6

Section 1

Introduction

Alpha Fuzion Sauna Body Pod

1

SECTION 1: INTRODUCTION

1.1 Purpose of the Manual

This manual explains how to correctly install, operate, and get the best performance from your
Alpha Fuzion Sauna Body Pod. It may be used as a guide, suitable for all levels of technical
expertise, in determining and servicing mechanical and electrical difficulties. This owner’s
manual is organized as a quick reference guide.

Any additional updated or supplemental

information for this reference guide may be distributed to you as needed.

Please read this

owner's manual carefully before installing your machine. Keep your manual near your machine
for quick reference.

1.2 Customer Service

We welcome and appreciate your comments, questions, and suggestions in order to continually
offer the highest quality products, accessories, and services to our customers. Our qualified
professional teams are ready to assist you with a prompt response to any question
communicated to us by telephone, computer, and/or fax.

1.3 Disclaimer

While every attempt is made to ensure the accuracy and completeness of the information in this
document, some errors may exist. NuAge Beauty does not accept responsibility of any kind for
customer loss due to use of or reliance upon this document.

NuAge Beauty reserves the right to make changes without notice in the product described or
contained herein in order to improve design and/or performance. NuAge Beauty assumes no
responsibility or liability for the use of the product, conveys no license or title under any patent,
copyright, or trademark right to this product or processes and makes no representation or
warranty that this product is free from patent, copyright, or trademark right infringement, unless
otherwise specified. Applications that are described herein for the product are for illustrative
purposes only. NuAge Beauty makes no representation or warranty that such applications are
suitable for the specified use without further testing or modification.

«
...
4
5
6
7
8
...
»

Содержание Alpha Fuzion








































































































Отзывы:

Нет отзывов