Section 7
Service
Alpha Fuzion Sauna Body Pod
43
2. Open hinge and remove five screws from the hinge plate attached to the base
chassis as shown in Figure 7.6.2
Removing Hinge Plate Screws on Base Chassis
.
Grasp each nut as it releases from the screw to avoid dropping into cavity of base.
3. Carefully lift the hinge assembly
up
and
out
of the base chassis and set on
prepared work surface.
4. Use the wrenches to remove pin bolt and nylon spacers from the lower hinge
mount. Remove the struts.
Note the hole in which the pin bolt was originally
mounted.
Figure 7.6.1 Removing Strut Pin Bolt and Nylon Spacers on Upper Hinge Assembly.
Figure 7.6.2 Removing Hinge Plate Screws on Base Chassis.
•
Hinge Replacement Steps: (Keep cylinder up, piston down as shown in Figure 7.6.2
Removing Hinge Plate Screws on Base Chassis
)
1. Connect the struts to new lower hinge mount (See Section 7.5).
NOTE: It is
important to
use the same mounting hole as the previous hinge.
2. Position new hinge assembly on base chassis and affix to surface using the five
screws and nuts previously removed as shown in Figure 7.6.1
Removing Strut Pin
Bolt and Nylon Spacers on Upper Hinge Assembly
.
Содержание Alpha Fuzion
Страница 1: ...206507 NA AF 10 0813 2 U...