NTT docomo FOMA SO706i, Инструкция по эксплуатации

Страница: 47 / 485

45
Bef
ore Using the Han
dset
Turning the FOMA terminal off
1
y
(2 seconds or longer)
The shutdown screen “SO706i” appears and the
power is turned off.
Turning the FOMA terminal on/off
automatically
<Auto power ON/OFF>
Set the Auto power function, the power supply
automatically on or off at the specified time.
z
The FOMA terminal does not turn off during using
another function, even if the Auto power OFF set time is
reached. In addition, the FOMA terminal does not turn
off when the alarm notification time or the i-
α
ppli Auto-
start time is the same as the Auto power OFF set time.
The FOMA terminal turns off after finish the function.
z
If the FOMA terminal turns off, the Music&Video
Channel program is not downloaded and reserved
update of the software or 1Seg timer recording is not
available. Note above when setting Auto power OFF.
<Example: To turn the FOMA terminal on automatically>
1
i
“SETTINGS” “Clock” “Auto
power ON”
■ To turn the FOMA terminal off automatically
“Auto power OFF”
2 “Active” Enter the time Select
whether to repeat or not
■ To cancel the Auto power ON/OFF
“Inactive”
Switching Between Japanese
and English
<Select language>
You can switch the languages between Japanese and
English to display function names and messages on
the display.
1
i
“SETTINGS” “Display” “Select
language” “English”
■ To change from English to Japanese
“ 日本語 ”
Setting the Default
<Initial setting>
After turning the FOMA terminal on, you can set “Set
main time”, “Change security code”, “Character size”
and “Keypad sound” as initial settings.
1 Initial setting screen “YES”
2 Set the main time → p.46
3
Change the security
code
→
p.101
The default setting is “0000” (4
zeros).
4 Set the font size → p.93
5
Set the keypad sound → p.85
6 Check the contents about Software
Update, then select “OK”
Setting the Clock
Use “Set main time” to set the date and time for the
FOMA terminal. Use “Set sub clock” to show/hide the
sub clock or set the display mode.
z
The FOMA terminal offers the function to retrieve
the time information (Greenwich Mean Time, GMT)
and time zone information (Area you are in) and
adjust time automatically.
z
There are different time zones from GMT. If multiple
cities or areas are registered in the same time
zone, “
” appears. Press
o
to change cities
or areas.
z
If the battery runs out or “Auto power OFF” activates
then the power is turned off, a screen appears
indicating that the power was turned off last time.
N
z
Before entering an area such as an aircraft or hospital
where there is electronic equipment that uses
extremely precise control systems or very low signal
levels and the use of mobile phones is prohibited, set
the “Auto power ON” setting to “Inactive” and then turn
the FOMA terminal off.
N N
z
When the FOMA card (UIM) is inserted, Select
language setting is stored on the FOMA card (UIM).
z
When “Select language” is set to “English”, only two
options of “ON/OFF” are available for “Info notice
setting”.
You can switch announcement language between
Japanese and English for outgoing and incoming
calls in some announcements.
→ p.316
N
z
When you set all functions, the initial setting screen no
longer appears when you turn on the FOMA terminal.
Initial setting
Ｃｈａｎｇｅ