NTT docomo FOMA SO706i, Инструкция по эксплуатации

Страница: 325 / 485

323
Netw
ork
Ser
vices
Switching phone numbers each time
when making a call
When 2in1 is set to ON and the mode is set to Dual
mode, phone numbers can be switched when making
a call.
z
This function is available only on the detail screen
of “Phonebook/Received calls/Dialed calls/Redial”.
<Example: To make a call using the phonebook>
1 Phonebook detail screen (p.73)
u
(FUNC) “Dial setting” “2in1/Multi
Num.” Select any item:
Number A …… Allows calls to be made from Number
A.
Number B …… Allows calls to be made from Number
B.
Cancel number …… Releases the setting and allows
calls to made according to Phonebook 2in1 setting.
N
z
When 2in1 is set to OFF, you can also perform “2in1
settings” by pressing
8
for 1 second or longer on
the standby screen.
<Mode switching>
z
You can also change mode by pressing
8
for 1
second or longer on the standby screen.
<Phonebook 2in1 setting>
z
You cannot set this function to UIM phonebook
entries.
z
Select “Display detail” from the function menu to
display “Phonebook detail” screen from “Phonebook
list” screen in this function.
<Standby display>
z
When Change Mode is set to A mode, standby
screens are displayed according to “Display setting”.
z
When set to the Kisekae Tool you downloaded, the
i-
α
ppli standby screen or the random display, the
default screen appears even when “Same as Number
A” is set.
<Disp. call/receive No.>
z
Names, phone numbers and mail addresses in the
screens below will be displayed in the set color.
• In-call screen
• Dialing/Receiving screen
• Redial/Dialed calls (list/detail)
• Received calls (list/detail)
• Sent
*
/Received address record screen (list/detail)
• Chaku-moji Sent messages record screen
* : In B mode, the screen for sent addresses cannot be
displayed.
z
The setting for Number A/Number B (Address A/
Address B) applies to each screen even when 2in1 is
set to OFF.
<Ringtone for Number B>
z
When making the same settings to Number A and
Address A, set each item as “Same as Number A”.
z
When the ring tone settings are duplicated, the priority
applies.
→ p.83
When you receive a call without caller ID on Number
B, priority is given to the “Ringtone for Number B”
setting.
N
z
“2in1/Multi Num.” in the function menu cannot be
selected when the mode is set to A mode or B mode.
z
When the following operations are performed, the
phone number selection screen is displayed and the
phone number to use can be selected.
• When making calls by entering phone number in the
phone number entry screen
• When using services from the special number
registered in Additional service
• When “Dialing” from the function menu in Sent/
Received address list is selected
• When using the Phone to function
• When pressing the switch on the flat-plug earphone/
microphone with switch (optional) on the phone
number entry screen
z
Dialing or AT command dialing from an external device
uses Number A for A mode/Dual mode and Number B
for B mode.