NTT docomo FOMA SO706i, Инструкция по эксплуатации

Страница: 216 / 485

214
1S
eg
Using Timer Activation/
Recording
<Booking program list/Timer recording list>
Set date and time, channel, program title, etc. Alarm
sounds at specified date and time indicating the
program/recording start.
z
Timer activation/recording alarms
→
p.289
z
Up to 100 activation/recording entries can be
booked.
z
Program guide i-
α
ppli, channel link displayed on a
site or mail message, etc. are also available for
timer activation/recording.
<Example: To book activation>
1
i
“1SEG” “Booking program list”
The “Booking program list”
screen appears.
■ To book timer
recording
“Timer recording list”
The “Timer recording list”
screen appears.
2
u
(FUNC) “New”
■
To edit booked schedule
u
(FUNC) “Edit”
Software key
o
displays “New” if no entry is
stored and “Edit” if any.
3
Select any item
Date setting (Start/End)
*1
…… Enter date and
time to start/end.
Enter date
……
Enter date and time.
Choose date …… Select date from Calendar,
then enter time.
Channel
……
Select channel.
Edit title …… Enter program title.
Repeat
……
Select “1 time”, “Daily” or “Select
day”.
Alarm
*2
…… Set whether to play the alarm at
specified date and time of time recording.
Alarm
*3
…… Select “ON”, “ON/Set time” (“15
seconds before” to “10 minutes before”) or “OFF” for
alarm at timer activation date and time.
Alarm tone
*3
…… Select the alarm tone from
Clock Alarm Tone or melody, i-motion or music
folders at timer activation date and time.
Volume …… Use
c
to adjust the alarm tone
volume.
Priority
*2
…… Set operation to be performed
when the start date and time arrives while using
1Seg/Music group (1Seg, Data Box (1Seg), Music,
Music&Video Channel).
Recording …… Interrupt/End current operation
to start recording.
Operation preferred …… A screen appears
asking whether to start recording. Select “YES”
to interrupt/end current operation to start
recording.
Activate TV w/ alarm
*3
…… Set whether to
activate 1Seg from the alarm notification screen.
If “ON” is selected, press
d
(TV) then select “YES”
to activate 1Seg in alarm notification.
*1 : For booking program, set “Date setting(from)”.
*2 : Set only for timer recording.
*3 : Set only for booking program.
4 Set each item
o
(Finish)
<Video recording>
z
If signal strength becomes , recording continues
but video/audio are not saved.
z
“ ” flashes during recording.
z
Recording is not interrupted even if screens are
changed by Multitask or a call arrives.
z
During recording, alarm sounds for about 2 seconds,
one minute before recording scheduled time.
Operation is performed based on “Priority” set at the
time of timer recording registration as follows:
• “Recording”: Confirmation message appears, video
recording is finished and timer recording starts.
• “Operation preferred”: Message appears asking
whether to start timer recording. Select “YES” to
end video recording and start timer recording.
Select “NO” to continue video recording.
z
Some data cannot be recorded until the memory is
full.
z
1Seg contains copy control signals: “Copy Never”,
“Copy Once”, “Copy Free”. Each broadcast station
sets copy control signals.
z
“Copy Never” program cannot be recorded. When
copy control signal changes to “Copy Never” during
recording, recording stops and video recorded until
then will be saved.
N
Booking program list
Function menu p.215