NTT docomo FOMA SO706i, Инструкция по эксплуатации

Страница: 291 / 485

289 Continued on next page
Con
venient Functi
ons
Checking entries
1 To Do list screen (p.288) Select an
entry
The “To Do list detail” screen appears.
Setting the Alarm Mode
<Alarm setting>
You can select either “Operation preferred” or “Alarm
preferred” as the alarm notification setting for “Alarm”,
“Schedule”, “To Do list” or “1Seg booking program”.
z
1Seg timer recording alarm works according to
“Priority” set at the time of setting timer recording.
1
i
“SETTINGS” “Clock” “Alarm
setting” “Operation preferred” or
“Alarm preferred”
When set to “Operation preferred”, the alarm is
given only when the standby screen is displayed.
When set to “Alarm preferred”, the alarm is given
even when operating the FOMA terminal or
during talking.
Alarm notification actions
●
When you set an alarm
After setting the alarm notification
in “Alarm”, “Schedule”, “To Do
list”, “1Seg booking program” and
“1Seg timer recording” the icon
appears on the standby screen.
■ Icon display on the standby screen
“ ” appears and turns to “ ” on the specified day.
● When the specified time is reached
Alarm for each function is given as shown in the
Table 1 (p.290).
z
When you set i-motion to the alarm, the FOMA
terminal notifies the alarm with the movie and the
voice (the animation during the alarm notification
may be changed depending on the icons and
categories you set).
● To stop the alarm tone
■ Alarm
When the Snooze setting is set to “OFF”
Pressing any key stops the alarm tone and the
animation/i-motion. Pressing any key again emits the
release tone “pipip” and the display disappears.
When the Snooze setting is set to “ON”
Pressing any key stops the alarm tone and the
animation/i-motion, an alarm message “Snooze...”
appears, then the alarm is notified again in the set
ringing interval (minutes). Pressing
y
while
“Snooze...” appears emits the release tone “pipip” and
the snooze is canceled.
To Do list
Shows the priority.
Shows the entry status.
The blue icon turns into red
when the specified day has
elapsed.
To Do list detail
Function menu p.288
Function menu p.288
N
z
The volume of the “Schedule” and “To Do list” alarms
is determined by the “Phone” setting in “Ring volume”.
z
The volume for the Clock Alarm Tone during a call is
same as “Volume” setting level.
z
The alarm tone during a call is not played in Snooze
even when the Snooze setting is set to “ON”.
z
Even if an i-motion is set in the “Alarm tone” setting,
the alarm is notified with the Clock Alarm tone and the
animation for the specified icon and category when
i-motion cannot be activated such as during a call.
z
Illumination alarm works according to “Schedule/
Alarm” under “Illumination set” for “Alarm”,
“Schedule”, “1Seg booking program” and “1Seg timer
recording”, and “To Do” under “Illumination set” for “To
Do list”.
<Alarm notification priority sequence>
z
If “Alarm”, “Schedule”, “To Do list”, “1Seg booking
program” and “1Seg timer recording” alarms are set at
the same time, alarm priority is assigned as follows:
①
Alarm
②
1Seg timer recording
③
To Do list
④
Schedule
⑤
1Seg booking program
If alarm notification is failed, the “ (Missed alarm)”
or “ (Missed program)” shortcut icon appears on
the standby screen.
→
p.290