NTT docomo FOMA SO703i, Руководство пользователя

Страница: 55 / 351

53
Voice/Videophone Call
● When a Chaku-moji is received by the recipient, “ ” appears in the sender’s terminal display and charge is
required.
● If the recipient does not receive the Chaku-moji, “ ” appears. In this case, there is no charge. (For
example, when the recipient’s terminal does not have Chaku-moji support or if the Chaku-moji was received
in a condition other than that set using the Set Message display menu.)
● If the recipient’s terminal has the following settings or conditions, Chaku-moji cannot be delivered to this
recipient and the call is not saved in the Received record of the recipient’s terminal. “ ” or “ ” is not
displayed on the sender’s terminal and there is no charge for this transmission.
- When the recipient’s terminal is outside of the service area
- When the recipient’s terminal is powered off
- When the Public mode (Driving mode) is set
- When the To answer the Record message is set to 0 seconds, etc.
● Even if a Chaku-moji was delivered successfully to the recipient, “ ” or “ ” may not be displayed in the
sender’s terminal display depending on the radio wave condition. In this case, charge is required.
● If you place a videophone call with a Chaku-moji while the Auto redial(voice) is set to [ON], the Chaku-moji
is sent even when this call is redialed as a voice call.
Changing the Caller ID Setting ON/OFF for an Individual Call
<186/184>
You can choose whether to notify a recipient of your phone number (caller ID) every time
you place a call.

The caller ID is important personal information. Carefully decide whether you want to notify a recipient of your
caller ID.
You can use the following methods to notify or not notify your caller ID.
Presetting for all calls Use the Set Notification to set [Notify]/[Not notify] (P.41).
Setting in the Phonebook Add “186/184” to the recipient’s phone number when you save it in the
Phonebook (P.87).
Setting when you place a call Set [Call with ID]/[Call with no ID] from the Call condition menu after dialing a
recipient’s phone number (P.53).
Enter “186/184” before dialing a recipient’s phone number (P.45).
●
When you place a call by pressing after dialing a phone number with “186/184”, the phone number is
saved in the Redial record with “186/184”.
Placing a Call by Specifying a Condition
When you place a call, you can select a call type and call condition from the Call menu
or Call condition menu, for example, whether to notify a recipient of your phone number.
Example: Placing a voice call
1
Enter a phone number in the stand-by display and press (Call).
Ｖｏｉｃｅ ｃａｌｌ
Ｖｉｄｅｏｐｈｏｎｅ
ＰｕｓｈＴａｌｋ
[Voice call] : Select a call condition for a voice call.
[Videophone] : Select an image to be sent (My side/Substitute image/Select sub
image) and the communication speed (64K/32K) to be used when
you place a videophone call.
[PushTalk] : Select whether to notify your phone number when you originate a
PushTalk call.
Continued