NTT docomo FOMA SO703i, Руководство пользователя

Страница: 42 / 351

40
Before Using the FOMA Terminal
1
From the Menu, select [Settings] → [Management] → [Init. setting] and press .
Ｄａｔｅ／ｔｉｍｅ
Ｃｈａｎｇｅ ｃｏｄｅ Ｙｅｔ
Ｋｅｙｐａｄ ｓｏｕｎｄ １
Ｆｏｎｔ ｓｉｚｅ
ＰｕｓｈＴａｌｋ ｃａｌｌｅｒ ＩＤ
ＯＦＦ
Ｉｎｉｔｉａｌ ｓｅｔｔｉｎｇ
2
Set each item.
● If you perform the Reset all data&set or do not change the Security code of the FOMA terminal, the
message “Initial setting is incomplete. Execute?” appears when you power on the FOMA terminal. When
you select [Yes], the display in step 1 appears and you can perform the initial setting.
Setting the Date and Time
<Date/time>
Default Auto time set: ON
You can set the date and time either by automatically correcting the time based on the
time information obtained from the DoCoMo network or by manually setting the time.
Example: Correcting the time automatically
1
From the Menu, select [Settings] → [Management] → [Date/time] and press .
Ａｕｔｏ ｔｉｍｅ ｓｅｔ
ＯＮ
Ｍａｎｕａｌ ｃｌｏｃｋ ｓｅｔ
Ｄａｔｅ／ｔｉｍｅ
[Auto time set] : Set the time automatically.
[Manual clock set] : Enter the time manually. When you set the time using the
Manual clock set, the Auto time set is set to [OFF].
2
Select [ON] at [Auto time set].
[ON] : Correct the date and time automatically.
[OFF] : Do not correct the date and time automatically. Set the time using the Manual clock set.
To set the time manually
Select [Manual clock set]
→
[Yes] and enter the year and date within the range from
2000/01/01 to 2050/12/31, and the time in 24-hour format (00:00 to 23:59). Press
(Complete).
● When you set the Auto time set to [ON], the date and time are corrected automatically when the FOMA
terminal is powered on with a UIM installed. Note, however, that there may be an error lasting several
seconds. The time cannot be automatically corrected in the following cases.
- Outside of the service area (The time may not be corrected automatically even inside the service area
depending on the radio wave condition.)
- While i-
α
ppli is running
● The date and time settings are retained even when you replace the battery pack. However, if you leave the
FOMA terminal without a battery pack or with a fully expended battery pack for a long period of time, the
date and time may be reset to “----/--/-- --- --:--”. In this case, set the date and time once again.
● If the date and time are not set, functions that use the clock, such as the current time icon, Schedule, Alarm,
i- α ppli Auto start, and calendar/clock display cannot be used. The date and time for the Redial/Received
record and the date and time on images shot with the camera are also not recorded.