NTT docomo FOMA SO703i, Руководство пользователя

Страница: 34 / 351

32
Before Using the FOMA Terminal
Using the UIM
The UIM (FOMA card) records user information such as your phone number. Insert a
UIM in the FOMA terminal to use it.
Inserting/Removing the UIM
When inserting/removing the UIM (FOMA card), make sure to power off and fold the
FOMA terminal, remove the battery pack, and perform the operation with the FOMA
terminal held with your hand.

If you insert the UIM forcibly, it may be damaged.
■ Inserting the UIM
1
Pull the tab and then pull out
the tray.
Pull out the tray until it stops.
Tab
2
Place the UIM on the tray with
the IC side facing up.
Align the notches of the tray and
UIM.
Notch
3
Push the tray until it stops.
■ Removing the UIM
1
Pull the tab and then pull out the tray.
2
Lift up the UIM with your finger to take it out.
● Make sure to keep a removed UIM safely.
About the UIM Security Code
You can set two Security codes, namely “PIN1” and “PIN2”, for the UIM (FOMA card).
These codes are set to “0000” at the time of subscription. You can change them to any
4- to 8-digit number you want (P.119).