NTT docomo FOMA SO703i, Руководство пользователя

Страница: 302 / 351

300
Appendix/External Device Interface/Troubleshooting
 When you update the software, your mobile phone-specific information (such as model and manufacturer’s
serial number) is automatically sent to the server (server for updating the software under DoCoMo’s
supervision). DoCoMo will not use the information sent from your mobile phone for any purposes other than to
update the software.

Never remove the battery pack while updating the software. The software update may fail if you do so.
 The software update can be made with data, such as Phonebook entries, images recorded by the camera
and downloaded data, remaining in the mobile phone. However, note that the safety of the data may not be
assured depending on the conditions of the mobile phone (e.g. malfunction, damage and exposure to water).
It is recommended to take a backup copy of important data (some data such as downloaded data may be
protected from backup copy).
 When the software update fails, the message “Rewrite failed” appears and no further operation is possible. In
this case, please bring the FOMA terminal to the nearest DoCoMo repair handling service counter.
Activating the Software Update
1
From the Menu, select [Settings] → [Management] → [SW Update] and press .
The Security code screen appears.
2
Enter the Security code and press (OK).

The Security code is masked by “ ”.

The Security code is set to “0000” at the time of purchase.
3
Confirm the messages.
Ｎｏｔｉｃｅ：
Ｃｈｅｃｋ ｙｏｕｒ
ｂａｔｔｅｒｙ ｉｓ ｆｕｌｌｙ
ｃｈａｒｇｅｄ
ＯＫ
Ｃａｎｃｅｌ
ＯＫ
Ｃａｎｃｅｌ
Ｒｅａｄｙ ｔｏ ｃｈｅｃｋ
ｆｏｒ ｕｐｄａｔｅ？
Ｒｅａｄｙ ｔｏ
ｓｅｎｄ ｙｏｕｒ
ｔｅｒｍｉｎａｌ ＩＤ？
ＯＫ
Ｃａｎｃｅｌ
Ｅｓｔａｂｌｉｓｈｉｎｇ
ＳＳＬ ｓｅｓｓｉｏｎ
（Ａｕｔｈｅｎｔｉ−
ｃａｔｉｎｇ）
Ｃｈｅｃｋｉｎｇ
The FOMA terminal starts SSL communication to check if the software update is necessary.
4
If necessary, select the timing to start update and press .
Ｕｐｄａｔｅ ｉｓ ｎｅｅｄｅｄ
Ｎｏｗ ｕｐｄａｔｅ
Ｒｅｓｅｒｖｅ
Ｃａｎｃｅｌ
[Now update] : Start updating the software. The software update may not be
completed successfully if the server is busy.
[Reserve] : Reserve a date/time to start the software update.
[Cancel] : Do not start updating the software.
When the message informing there is no need to update the software
appears
You do not need to update the software. Continue to use the FOMA
terminal without updating.
● When the server is busy, the screen to the right appears. To reserve, select [Reserve]
and set a date/time for the update.
Ｓｅｒｖｅｒ ｉｓ ｂｕｓｙ
Ｒｅｓｅｒｖｅ
Ｃａｎｃｅｌ