NTT docomo FOMA SO703i, Руководство пользователя

Страница: 218 / 351

216
Displaying/Editing/Managing Data
Using the FOMA Terminal with
a PC
<Memory mode>
When you connect the FOMA terminal to a PC using
the FOMA USB Cable (optional), you can use it as
an external drive to read/write data on the microSD
memory card.

The operating environment for using the FOMA terminal
connected to a PC is as follows.
Item Required environment
C o n n e c t i o n
cable FOMA USB Cable (optional)
PC main unit PC with a USB port (Universal Serial Bus
Specification 1.1 compliant) that can be used
to connect the FOMA USB Cable (optional)
OS Windows 2000 Professional (SP3 or later),
Windows XP (Japanese version)
1
Connect the FOMA terminal and PC using the
FOMA USB Cable (optional).
3
1
2
USB connector
External
connection terminal
Insert the con-
n e c t o r h o r i -
zontally with
the label side
facing up.
External connection
connector
FOMA USB Cable (optional)
USB terminal
The notification icon “ ” (USB cable
cncted) appears in the stand-by
display.
2
Press (Link) in the stand-by display, select [ ],
and press .
Ｃｏｍｍｕｎｉｃａｔｉｏｎ ｍｏｄｅ
Ｍｅｍｏｒｙ ｍｏｄｅ
ＵＳＢ ｍｏｄｅ ｓｅｔｔｉｎｇ
[Communication mode]:
Perform packet and 64K data communication, and
send/receive data.
[Memory mode]:
Read and write data from/to the microSD memory card.
3
Select [Memory mode] and press .
The Memory mode is set and “ ” changes to “ ”.
On the PC, “
リムーバブル ディスク ” is displayed for the
microSD memory card.
● If the FOMA terminal is not connected to a PC correctly or
the battery level is very low or 0, not only data cannot be
sent/received, but also it may be lost in some cases.
●
Do not unplug the FOMA USB Cable (optional) during
reading/writing data. If you do so, not only data cannot be
sent/received, but also it may be lost in some cases.
● Do not format the microSD memory card using a PC, etc.
Make sure to format it on the FOMA terminal.
Terminating the Memory Mode
To remove the FOMA terminal from a PC, perform the
procedure to safely remove the hardware on the PC in
advance, which is slightly different for each OS.
Example: When using Windows XP
1
Double-click the task tray icon [ ]
（ハードウェア
の安全な取り外し） on the Windows desktop.
2
Move the pointer to [USB 大容量記憶装置デバイス ]
and click [ 停止 ].
3
Click [OK] and confir m that the hardware is
unmounted successfully.
4
Press (Quit) in the Memory mode display of the
FOMA terminal.
Ｃｏｎｎｅｃｔｉｎｇ
Ｄｏ ｎｏｔ ｕｎｐｌｕｇ
ＵＳＢ ｃａｂｌｅ
Ｍｅｍｏｒｙ ｍｏｄｅ
5
Select [Yes] and press .
The Memory mode is terminated.
6
Remove the FOMA USB Cable (optional) from the
FOMA terminal and PC.
2
1
3
USB connector
External
connection terminal
Pull out the cable
while holding the
release buttons
pressed.
External connection
connector
FOMA USB Cable (optional)
USB terminal