SPLITMUX Quad Screen 4K 18GB Multiviewer
71
INFRARED REMOTE CONTROL
The IRT-UNV Infrared Remote Control (optional-sold separately) provides the user with limited remote control of up to 15 NTI
SPLITMUX-4K18GB-4 multiviewers. The IRT-UNV can control connections and change the operating modes without having to
press buttons on the SPLITMUX case.
Note: The IRT-UNV will have no control over OSD menus.
Materials
Materials supplied with the IRT-UNV
:
NTI IRT-UNV Infrared Remote Control
2- AAA Batteries (installed)
Buttons
The IRT-UNV Infrared Remote Control user interface consists of a keypad with
29 buttons. Fourteen of those buttons are used for the SPLITMUX
and have the following functions:
Numerical Values (1-4)
Selects port numbers (for IN)
Select
mode
to switch to
IN
Pressed to indicate an input port selection
OUT
Pressed to initiate change of mode
SYS
Pressed to select the desired SPLITMUX to be controlled
Only used when controlling multiple systems
Must be followed by a system number: 1-15
ENTER
Press to have command take immediate effect
Press to complete command when SYS is used
SAVE
Pressed to save a configuration of channels as viewed on the display
RECALL
Pressed to recall and restore a configuration of channels previously
viewed on the display
AUDIO
Press to select which input the audio controls will effect
VOL + / -
Press to increase/decrease audio levels from selected input
MUTE Audio
Press to toggle audio on/off from selected input